Plumbers and heating and cooling contractors in South Dakota
83 plumbers and heating and cooling contractors are listed in South Dakota. 17 hold an active USDOT registration. The 1 counties listed below have at least 15 each and account for 48 of them.
South Dakota licenses plumbing contractors and plumbers through its Plumbing Commission.1, 2 There's no heating and cooling license on South Dakota's state licensing list.2 All plumbing installations in South Dakota need a state installation certificate and inspection, except in cities that inspect their own.3
Counties
| County | Contractors |
|---|---|
| Minnehaha County | 48 |
Other counties in South Dakota
35 contractors in 17 counties with fewer than 15 listings.
Brookings County 3 contractors
Brookings Plumbing Heating-AC, Ekern Home Equipment Company, Lynn's Heating & Air
Butte County 1 contractor
Clay County 2 contractors
Codington County 2 contractors
Davison County 1 contractor
Deuel County 1 contractor
Kingsbury County 1 contractor
Lake County 1 contractor
Lawrence County 1 contractor
Lincoln County 8 contractors
Aaction Rooter, LLC, Around The Clock Drain Master, Doctor Heating & Refrigeration, Foley's Heating & AC Inc., Lou's Plumbing & Heating LLC, MJ Aire, Merit Heating & Air Conditioning, Quality Plumbing & Service, LLC
Meade County 1 contractor
Potter County 1 contractor
Stanley County 1 contractor
Sully County 1 contractor
Turner County 2 contractors
Union County 5 contractors
Dakota Mechanical Inc, Murphy Company, North Plumbing, R C & S, L.L.C., RP Constructors LLC
Yankton County 3 contractors
Kevins Plumbing Service LLC, Kaiser Heating & Cooling, The Drain Doctor -- Yankton and Vermillion
Plumbing and HVAC rules in South Dakota
- Heating and cooling license
South Dakota's Department of Labor and Regulation licenses plumbing but lists no heating and cooling license. Ask your city or county whether it licenses heating and cooling contractors.2
- State codes
South Dakota's State Plumbing Code is the 2024 Uniform Plumbing Code with amendments.4, 5 South Dakota's State Fire Marshal has adopted the 2015 International Mechanical Code, which local governments may amend.6
- Replacement permits
South Dakota's Plumbing Commission requires a plumbing installation certificate (a permit) and a state inspection for all plumbing installations, except in cities with their own inspections: Aberdeen, Brandon, Rapid City, Sioux Falls and Spearfish. For heating and cooling work, ask your local building department.3
What plumbing and HVAC work costs in South Dakota
These are published national ranges, not quotes. Local quotes vary.
- A plumber's hourly rate
- $45 to $200 an hour; most charge $70 to $150 (HomeAdvisor, Fixr, HomeGuide)
- A plumber's service call
- $50 to $300 a visit, which often covers the first hour (HomeAdvisor, Fixr, HomeGuide)
- After-hours or emergency call
- about $100 to $300 added to the call, or about $150 to $350 an hour (HomeAdvisor, Fixr, HomeGuide)
- Burst or leaking pipe repair
- $200 to $3,000; the guides' averages run $500 to $1,200 (HomeAdvisor, Fixr, HomeGuide)
- Clearing a sink, tub or toilet drain
- $100 to $275 (HomeAdvisor, Fixr, HomeGuide)
- Clearing the main line
- $175 to $800; typically $350 to $650 (HomeAdvisor, Fixr, HomeGuide)
- Hydro jetting
- $350 to $1,400, depending on the line and the blockage (HomeAdvisor, Fixr, HomeGuide)
- Gas tank water heater
- $700 to $2,700 installed; about $1,900 on average (HomeAdvisor, Fixr, HomeGuide)
- Tankless water heater
- $1,600 to $5,600 installed for gas, depending on gas line and venting work (HomeAdvisor, Fixr, HomeGuide)$850 to $3,000 installed for electric, before any panel upgrade ($850 to $1,700) (Fixr, HomeGuide)
- Heat pump water heater
- $2,000 to $4,600 installed in place of an electric tank; more when it replaces gas (HomeAdvisor, Fixr, HomeGuide)
- Sewer camera inspection
- $125 to $500 (HomeAdvisor, Fixr, HomeGuide)
- Sewer line replacement
- about $1,400 to $5,300 for a typical line (HomeAdvisor, HomeGuide)$50 to $250 a linear foot (HomeAdvisor, HomeGuide)
- Replacing central AC on existing ducts
- $3,900 to $8,000; about $6,000 on average (HomeAdvisor, Fixr, Forbes Home)
- Swapping a heat pump on existing ducts
- $4,000 to $8,000; a 3-ton system about $3,900 to $6,200 (HomeAdvisor, Forbes Home, HomeGuide)
- A whole-home heat pump system
- commonly $14,000 or more (NYSERDA, Massachusetts EEAC, Fixr, HomeGuide)
- Replacing a gas furnace
- $3,800 to $6,200 at standard efficiency (HomeGuide, HomeAdvisor, Fixr, Forbes Home)$5,200 to $12,000 at high efficiency (90% AFUE and up) (HomeGuide, HomeAdvisor, Fixr, Forbes Home)
- Replacing an electric furnace
- $1,600 to $8,000, with a like-for-like swap at the low end (Fixr, HomeAdvisor)
- A single-zone mini-split
- $2,000 to $5,000 (HomeGuide, Fixr, Forbes Home)
- A multi-zone mini-split
- $3,000 to $14,000 for 2 to 4 zones (HomeGuide, Fixr, Forbes Home)
- An HVAC tune-up
- $70 to $350 a visit; a basic tune-up is often about $100 to $200 (HomeGuide, HomeAdvisor, Fixr)
Ranges from HomeAdvisor, HomeGuide, Fixr, Forbes Home, NYSERDA and the Massachusetts EEAC, checked September 2026.